Mouser adds Microchip Hello FPGA Kit

April 14, 2020 //By Ally Winning
Mouser has added Microchip’s Hello FPGA Kit, which is designed as an entry-level platform for users with low to medium experience with FPGAs.
Mouser has added Microchip’s Hello FPGA Kit, which is designed as an entry-level platform for users with low to medium experience with FPGAs.

The Hello FPGA Kit is intended for prototyping AI and digital signal processing applications. It includes a power monitor GUI to allow the measurement of FPGA core power consumption while running designs. The kit includes the FPGA mainboard, camera sensor board and an LCD board. The FPGA mainboard is based around a SmartFusion2 SoC FPGA that combines an FPGA fabric with a 166-MHz Arm Cortex-M3 MCU subsystem with 256 Kbyte flash, peripherals, instruction cache, and Embedded Trace Macrocell.

The FPGA mainboard also features a Microchip PIC32MX7 MCU to control the SmartFusion2 SoC and monitor power. It also has Arduino and Mikroe mikroBUS connectors for prototyping and expansion. The kit can be used as a standalone unit, or as an extension to existing Microchip kits over the PICkit Header.
More information
https://eu.mouser.com/new/microchip/microchip-m2s-hello-fpga-kit/

Related news

ADI ADIS16507 MEMS IMU available from Mouser

Mouser signs Kontron on global distribution deal

Highest-resolution single-chip mmWave sensors enable intelligent autonomy

World's first connected tractor demonstrated by ETSI


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.