Although it is not clear yet which technologies 6G will entail, it is already apparent that frequency bandwidths need to be further increased to enable terabit class data rates. Wide contiguous frequency blocks can only be found at sub-THz and THz bands, i.e. in the frequency range above 100 GHz. The utilization of THz frequencies for 6G is estimated to become commercial in the next 8 to 10 years. But Rohde & Schwarz has already presented a demonstrator setup for 300 GHz to customers. The system was also displayed at the EuMW2019 in Paris as part of a workshop on mmWave and THz Wireless Communication, where it consisted of 300 GHz transceiver frontends, the R&S SMW200A vector signal generator and R&S FSW43 signal and spectrum analyzer as well as of units for synchronization of transmitter and receiver.
Involved in the current collaboration are the Fraunhofer HHI and the Fraunhofer IAF. The HHI works on signal processing, synchronization between transmitter and receiver, and system integration. The IAF contributes with high-performance millimeter-wave transmitter and receiver modules. The joint research targets frequencies above 100 GHz, where the primary focus is on the D-band (150 GHz) and the H-band (300 GHz). Carrier frequencies above 300 GHz are still subject of fundamental research. A first demonstrator resulting from the research collaboration is a system allowing signal generation and signal analysis at 300 GHz with 2 GHz bandwidth. The signal can be arbitrary modulated for conducting transmission experiments with Beyond 5G candidate waveforms, which are appropriate for THz communication or for performing channel propagation measurements.
Pioneering activities beyond 5G have already started about a year ago, when Rohde & Schwarz set up the world's first ultra-wideband channel sounder for mobile communications exceeding 100 GHz: https://www.rohde-schwarz.com/_229356-596500.html