MENU

Low-latency PHY solution for industrial Ethernet

By eeNews Europe

ADIN1300 is a low-power, single-port Ethernet transceiver that offers best-in-class power and latency specifications for time-critical industrial Ethernet applications at up to Gigabit speeds. The device has been designed to operate reliably in harsh industrial conditions over extended ambient temperature ranges.

Targeting motion control, factory automation, building automation, test and measurement, and other IIoT applications, ADIN1300 provides:

• 10BASE-Te/100BASE-TX/1000BASE-T IEEE 802.3 compliant MII, RMII and RGMII MAC interfaces

• 330mW power consumption 1000BASE-T

• 290ns 1000BASE-T RGMII Latency (Rx + Tx)

• EMC Test Standards:

   ◦ IEC 61000-4-5 surge (±4 kV)

   ◦ IEC 61000-4-4 electrical fast transient (EFT) (±4 kV)

   ◦ IEC 61000-4-2 ESD (±6 kV contact discharge)

   ◦ IEC 61000-4-6 conducted immunity (10 V)

   ◦ EN55032 radiated emissions (Class A)

   ◦ EN55032 conducted emissions (Class A)

• Unmanaged configuration using multi-level pin strapping

• Start of Frame Detection for IEEE 1588 Time Stamp Support

• 40-lead, 6mm x 6mm LFCSP

More information

https://www.analog.com/ADIN1300

https://www.analog.com/ADIN1200

https://www.analog.com/en/education/education-library/videos/6093458457001.htmlhttps://www.analog.com/industrial-ethernet

 


Share:

eeNews Embedded
10s