FPGA-based prototyping modules reach 14m gates, 23Gb/sec transfer rates

FPGA-based prototyping modules reach 14m gates, 23Gb/sec transfer rates

New Products |
Pro Design has released three high-speed FPGA modules for its proFPGA product family of FPGA based prototyping systems. The proFPGA modular, flexible and scalable systems are based on latest Xilinx Virtex UltraScale, UltraScale+ and Intel Stratix10 FPGA technologies.
By Graham Prophet

Share:

The units are intended for engineers who need a most efficient and high-performance FPGA based prototyping solution for ASIC and IP prototyping, real time system integration and pre-silicon software development to reduce the time to market.

 

The proFPGA XCVU9P, XCVU7P and XCVU5P UltraScale+ FPGA modules have been optimized and trimmed to ensure best signal integrity and were designed and produced with special high-end PCB material to reach highest performance and signal rating. In combination with the dedicated high-speed connectors a maximum point to point speed of up to 1 Gbps single ended over the standard FPGA IOs and up to 23 Gbps over the high-speed transceiver IOs can be achieved.

 

These FPGA modules can be assembled on the proFPGA motherboards and mixed with the existing proFPGA FPGA modules. They are fully compatible with all proFPGA accessories such as interface boards and interconnection cables.

 

The latest FPGA modules comprise 6 extension sites, 585 free accessible user IOs and an ASIC equivalent capacity from 7.1 up to 14 million gates. The highlight and distinguishing feature of these FPGA modules is the availability and performance of the 64 high speed transceivers (GTY) which allow stable operation with performance of up to of 23 Gb/sec data transfer rate allowing verification and test of high speed interfaces such as PCIe Gen4.

 

Pro Design; www.proFPGA.com

 

 

Linked Articles
eeNews Embedded
10s