Fexible stacking heights with rugged, high-speed edge connector

Fexible stacking heights with rugged, high-speed edge connector

New Products |
Hirose’s 0.8mm pitch board-to-board high-speed card edge FX27 Series connector allows for varying board stack heights by simply changing the length of the PCB interposer.
By eeNews Europe

Share:

Additionally, the FX27 Series features an increased XY axis floating range compared to previous high-speed FunctionMax family connectors. Now supporting a floating range of ±1.2 mm in both the X and Y directions, the FX27 Series board-to-board connector absorbs stress from misalignment while tightening screws and PCB shrinkage caused by high temperatures. The card edge connector also has a wide self-alignment range of ±0.7 mm in both the X and Y directions. The floating contact and self-alignment design eases the assembly process providing time and cost savings, especially when mating multiple connectors on the same board.
Supporting PCI Express Gen 1 interface standard, the FX27 Series offers data transmission speeds up to 2.5Gbps. When used as a stacking connector, the FX27 Series stacking height, wiring and component mounting are customizable. A conductor to transmit power with flexible height adjustment is also available. The FX27 Series operates in environments from -55 to 105ºC, including the temperature rising by current flow and delivers a 0.5A current per pin capacity.

Hirose – www.hirose.com

Linked Articles
eeNews Embedded
10s