MENU

DustPhotonics and MaxLinear drive 400G/800G transceivers performance

Technology News |
By Jean-Pierre Joosting

DustPhotonics and MaxLinear have partnered to demonstrate a silicon photonics chipset with integrated lasers directly driven from a DSP without the use of any external driver chip, providing exceptional total system performance for 400G and 800G transceivers.

The MaxLinear Keystone DSP and DustPhotonics Carmel silicon photonics chip were shown together to support direct-drive operation, which reduces the overall cost and power dissipation of optical transceivers for data communication. This combined solution is ideal for applications such as 400Gb/s and 800Gb/s pluggable modules and on-board optics.

The DustPhotonics chip includes an integrated DFB (Distributed-feedback) laser and DustPhotonics revolutionary Low Loss Laser Coupling technology (L3C), achieving a very efficient coupling of light into the Photonic Integrated Circuit (PIC). This unique technology enables the use of 1 laser for every 4 channels.

The MaxLinear Keystone chip is part of a family of DSPs capable of both 400Gb/s and 800Gb/s operation, based on TSMC’s 5nm process. The Keystone DSP provides a rich set of features for transceivers, CPO (Co-Packaged Optics) modules and on-board optics while achieving significantly lower power than competitive solutions. The integrated drivers are optimized for silicon photonics direct-drive and provide the best industry performance for this application.

The combined solution enables performance that significantly exceeds all IEEE specifications. In terms of power consumption, 400Gb/s transceivers can now be designed to reach sub 7-W.

“DustPhotonics is focused on enabling best-in-class Silicon Photonics chips to simplify the efforts of transceiver and systems designers,” said Yoel Chetrit, Vice President R&D of DustPhotonics.

“Not only can our Carmel chip simplify the overall system design by reducing the total number of lasers to a single laser for 4 channels, but it also eliminates the external driver, which reduces the cost, power and complexity of the overall system.”

“The combination of our Keystone 5nm integrated driver DSPs with DustPhotonics’ silicon photonics demonstrates the significant power and performance advantages achievable with our integrated drivers,” said Drew Guckenberger, Vice President of Optical Interconnect at MaxLinear. “With double-digit year-on-year growth in market demand for 400Gb/s and 800Gb/s transceivers, this integrated solution can create tremendous value for our customers.”

www.dustphotonics.com
www.maxlinear.com


Share:

Linked Articles
eeNews Embedded
10s