Colour-adjustable, Bluetooth-connected, smart lighting reference design

Colour-adjustable, Bluetooth-connected, smart lighting reference design

This 12W LED downlight design features sophisticated dimming and colour management over Bluetooth using a smartphone application
By eeNews Europe

Share:

Power Integrations (San Jose, California) and Casambi Technologies OY (Finland) have developed a reference design, DER-612, describing a constant-voltage (CV), constant-current (CC) 12-W isolated flyback power supply with power factor correction for smart lighting applications.

 

The design includes a 3.3V power supply to drive a Casambi CBM-001 Bluetooth wireless module, which provides dimming and colour management control of a four-string LED load from 0 mA to 400 mA. The power supply operates over a universal input voltage range of 90 VAC to 265 VAC and achieves greater than 0.8 power factor across all line conditions.

 

The design is based on Power Integrations’ InnoSwitch-CH power supply controller, which combines primary, secondary and feedback circuits in a single surface-mounted offline flyback switcher IC. The IC incorporates the primary FET, the primary-side controller and a secondary-side synchronous rectification controller. The device also includes Power Integrations’ magneto-coupling communications technology, FluxLink, which safely bridges the isolation barrier and eliminates the need for an optocoupler. Secondary-side control enables highly accurate constant-voltage regulation and an ultra-fast step load response while simple PWM control eliminates the need for a secondary DC/DC regulator. The high efficiency and very low standby power of the IC eliminates the need for additional heatsinks and enables designers to create solutions that meet DOE-6 regulations. A built-in secondary-side auxiliary power output supports RF and MCU control circuitry.

 

CBM-001 is a Class 2 embedded Bluetooth 4.0 module designed for LED lighting control applications, light fixtures and LED bulbs. It is pre-programmed with Casambi’s proprietary firmware, making it completely compatible with other Casambi enabled devices. CBM-001 is controlled wirelessly with Casambi smartphone and tablet applications using the Bluetooth 4.0 protocol. Devices automatically form a self-healing and self-organizing wireless mesh network so that a large number of fixtures can be controlled from any point. No external gateway module is needed.

 

DER-612 enables simple parallel connection of LED strings for RGBW lighting. It can be downloaded at https://www.power.com/der-612

 

Power Integrations; www.power.com

 

Casambi Technologies; www.casambi.com

 

 

 

eeNews Embedded
10s