20 Gbps multi-channel mux/demux

20 Gbps multi-channel mux/demux
New Products |
Mux/demux facilitates better HD/UHD video signal routing with 35 percent increase in speed compared to competitive devices.
By Jean-Pierre Joosting

Share:

Diodes Incorporated has further expanded its video passive multiplexer/demultiplexer (mux/demux) switch portfolio with the introduction of the 4-channel PI3WVR14412. Supporting up to 20 Gbps operation, this 2:1/1:2 mux/demux device provides speeds beyond those of other products — resulting in a 35% increase compared to competitive devices.

The PI3WVR14412 mux/demux is fully compliant with both the DisplayPort™ 2.0 and HDMI2.1 interface standards, which are featured in the latest generation of graphics processor units (GPUs). Key applications are mobile workstations, games consoles, docking systems, notebook computers, monitors, TVs, and set-top boxes.

The PI3WVR14412 enables the routing of 4K high definition (HD) and 8K ultra-high definition (UHD) video signals while exhibiting extremely low signal attenuation. This routing can either be from two sources to a single sink or conversely a single source to dual sinks.

Use of proprietary technology is responsible for the elevated speeds attained by the PI3WVR14412. The high-speed channels of this device are also able to maintain industry-leading signal integrity characteristics. When running at 10 GHz, a -2 dB insertion loss and a -10 dB return loss are typically witnessed. The channel-to-channel crosstalk is just -35 dB and off isolation is -15 dB at this frequency. Bit-to-bit skew is normally only 5 ps.


Bidirectional communication is provided via the AUX channel. This means that other protocols like USB 2.0 can be supported, thereby avoiding the need for additional cabling to the host and reducing overall system costs. The wide input signal voltage range covered (0 V to 3.6 V) allows direct coupling of HDMI at VDD bias and DP signals at 0 bias. Fewer passive components are required, so less board real estate is needed. Hot plug detection (HPD) and display data channel (DDC) are also included, which eliminates the need for an external mux. An extended temperature range of 0°C to 105°C is supported.

These mux/demux devices are supplied in compact 40-pin TQFN packages (with 3- x 6- x 0.75-mm dimensions), and they have a unit price of $1.70 in 5000 piece quantities.

www.Diodes.com

Linked Articles
eeNews Embedded
10s