SFF embedded system board built around Intel's Celeron and Pentium MPUs

February 09, 2018 // By Julien Happich
Portwell’s WUX-3350 small form factor (SFF) embedded system board features the Intel Celeron and Pentium processor series, sporting the low power Intel Gen9 graphics engine with up to 18 execution units for enhanced 3D graphics performance and greater speed for 4K encode and decode operations.

The 101.6x101.6mm board also features DDR3L SO-DIMM up to 8 GB supporting 1866/1600 MT/s; six USB ports; one DisplayPort (DP) and one HDMI with resolution up to 4096x2160; one COM port for RS-232 on rear I/O (RJ45 connector); and multiple storage interfaces with 1x SATA III port, 1x microSD 3.0 socket and support for onboard eMMC 5.0 up to 64G. Moreover, it integrates the M.2 interface, which provides wireless connectivity including Wi-Fi and Bluetooth, for IoT edge devices connectivity. The unit operates under 6W/10W for fanless applications. It also supports a wide voltage of power input from 12V to 19V for rugged applications.

Portwell – www.portwell.eu